Where to Buy
Search this part number directly on major distributors
Documentation
General information based on part classification, not a certification determination. Your operator's quality manual governs.
What to ask the seller for
- FAA Form 8130-3 from the PAH or an authorized release traceable to the PAH
- Manufacturer's CofC if a Form 8130-3 was not issued
Governing reference: FAA Order 8130.21J
PMA Alternatives1 found
| PMA Part # | Manufacturer | Supplement | Approved | Source |
|---|---|---|---|---|
| 2003 Installation, Plenum Hold-Down | Cascade Aircraft Conversions LLC | 3 | 2006-06-27 | — |
Supplemental Type Certificates15 found
FAA-approved modifications that reference this part number
Installation of mounting hardware in accordance with Paravion Technology Master Drawing List DL-407LS-100, Revision N/C, dated April 01, 2002, FAA approved dated January 27, 2003 or later FAA approved revision, and approval for the aircraft to be operated by a single pilot from the left crew seat.
Aircraft: 407
Installation of Outerlink Corporation CP-2 Satcom System in accordance with Outerlink Corporation Master Document List No. D000-1002, Revision IR, dated December 23, 2003, or later FAA-approved revision.
Aircraft: MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 117 A-4, MBB-BK 117 B-1 +2 more
Installation of a the TPA-81A Traffic Alert and Collision Avoidance System (TCAS) Processor in accordance with Master Drawing List 756-0119-001, Revision D, dated November 21, 2003, or later FAA approved revisions.
Aircraft: 717-200, MD-90-30
Installation of Universal Avionics EFI-550 2-Display EFIS System. Data required: (1) Columbia Avionics, Inc. Master Document List No. 30141165, Revision 3, dated September 24, 2003; and (2) FAA Approved Flight Manual Supplement 30141180, dated September 30, 2003, or later FAA Approved Revisions to (1) or (2).
Aircraft: 500, 550, S550
Installation of Universal Avionics EFI-550 2-Display EFIS System. Data required: (1) Columbia Avionics, Inc. Master Document List No. 30141145, Revision 3, dated September 24, 2003; and (2) FAA Approved Flight Manual Supplement 30141160, dated September 30, 2003, or later FAA Approved Revisions to (1) or (2).
Aircraft: 501, 551
Modification of Wing Inboard and Outboard Aft Trailing Edge Flaps in accordance with FAA Approved AeroTech Services, Inc. Master Drawing List No. 52-0001, Revision C, dated May 20, 2003, or later FAA Approved Revisions. (for Model 737-200, -200C and -300 Series airplanes), and FAA Approved AeroTech Services, Inc. Master Drawing List No. 52-0001, Revision E, dated January 6, 2005, or later FAA Approved Revisions. (for Model 737-400 and 500 Series airplanes.)
Aircraft: 737-200 Series, 737-200C Series, 737-300 Series, 737-400 Series +1 more
Installation of the Concorde RG-380E/K and RG2380E/L series VRSLA batteries in the Raytheon King Air Model airplanes listed on the attached FAA Approved Model List (AML) No. SA01260WI, dated June 9, 2004, in accordance with Concorde Battery Corporation, Master Drawing List, Drawing No. 5-0177, Rev. N/C, dated May 1, 2003, or later FAA approved revision.
Aircraft: 65-90, 65-A90, 65-A90-1, 65-A90-2 +19 more
Installation of an Espresso Maker in accordance with STC Required Documents List (RDL) No. 230-2003 Revision 5 dated January 14, 2010, or later FAA approved revision
Aircraft: Hawker 800XP, Hawker 850XP, Hawker 900XP
Installation of IRCM System in accordance with Pro Star Aviation Master Document List No. 0103-MDL-01, Revision B, dated August 6, 2003, or later FAA-approved revisions.
Aircraft: 412EP
Installation of IRCM system, model ALQ-144A(V)7, in accordance with Pro Star Aviation Master Document List, Document Number 0403-MDL-01, dated November 19, 2003.
Aircraft: 407
Fabrication of PA-18 Inspection Covers in accordance with Cub Crafters, Inc. Master Drawing List Report CR124500-3, dated July 14, 2003, or later Federal Aviation Administration (FAA) approved revision. The inspection covers must be installed in accordance with Cub Crafters, Inc. Installation Instructions Report CR124500-2, dated June 23, 2003, or later FAA-approved revision.
Aircraft: PA-18, PA-18-105 (Special), PA-18-125 (Army L-21A), PA-18-135 +14 more
Install heavy duty tail wheel assembly in accordance with Cub Crafters, Inc. Master Document List Report CR123300-3, Revision D, dated July 15, 2003, or later Federal Aviation Administration approved revision. This modification does not require specific continued airworthiness instructions. Federal Aviation Regulation 43 is adequate to insure Continued Airworthiness of this modification.
Aircraft: PA-18, PA-18-105 (Special), PA-18-125 (Army L-21A), PA-18-135 +14 more
Install replacement wing assembly in accordance with Cub Crafters, Inc. Master Drawing List, 123400MDL, Revision C, dated December 8, 2003, and Installation Instructions Document CR123410II, Revision NC, dated September 23, 2003, or later Federal Aviation Administration approved revision.
Aircraft: PA-18, PA-18-105 (Special), PA-18-125 (Army L-21A), PA-18-135 +14 more
Reconfiguration of interior arrangement per U. S. Technical Consultants\nMaster Control List 2403-25-000, Revision NC, dated March 4, 1997.\nMaster Control List 2403-25-000, Revision A, dated April 15, 1997.\nMaster Control List 2403-25-000, Revision B, dated August 8, 1997, or later FAA approved revisions; and as revised by United Air Lines Master Document List No. 00283, Revision Original, dated August 23, 2003, or later FAA approved revisions.
Aircraft: 737-300 Series, 737-500 Series
Installation of a flight deck door in accordance with Duganair Technologies Inc., Index List, QS-00001-3A, Revision B, dated August 27, 2003, or later FAA approved revisions. FAA Approved Flight Manual Supplement No. QWC737101-4, Revision 1, dated December 16, 2004, or later FAA approved revision is required as part of this installation.
Aircraft: 737-200 Series, 737-300 Series, 737-400 Series, 737-500 Series
Airworthiness Directives
Synced 40 days ago (09/27/2026)No Active Airworthiness Directives
No FAA or EASA ADs are linked to this part number. Always verify against the aircraft's maintenance records before install.
Service Difficulty Reports
No Service Difficulty Reports
No failure reports found for this part number in the FAA SDR database.
Suspect-Parts Alerts (SUP/UPN)
No Suspect-Parts Alerts
This manufacturer is not named in any active FAA Suspect Unapproved Parts (SUP/UPN) notification.
NSN Cross-References1 NSN — DLA WebFLIS
National Stock Numbers assigned to this part number by the U.S. Defense Logistics Agency
| NSN | Standardized Name | FSC | DLA List Price (gov't catalog) | CAGE / Manufacturer |
|---|---|---|---|---|
| 5310-00-804-0141 | WASHER,FLAT | 5310 | $0.77/HD | 70318ALLMETAL SCREW PRODUCTS CORP |
DLA PUBLOG published list price — government procurement catalog, not a commercial market price. Prices may differ from current commercial availability.
Government Award Prices
U.S. government contract award prices from FPDS — unit prices for NSN purchases by DoD/DLA agencies
No government contract award price data found for this part number.
Identifiers
Manufacturer
ALLMETAL SCREW PRODUCTS CORP
Source
DLA WebFLIS
ATA Chapter
20
Type
OEM